Habistat Pulse Proportional Stat 600W White

Product Information

It has a blue LCD making it very easy to read, and it brightens during day mode and dims during night mode settings for comfortable viewing. You will also need to ensure that your chosen thermostat will work with your lamp, as some are specially designed to work with just heat mats for instance, and will be overloaded if connected to the voltage of a bulb. This could break the glass, which is dangerous.

I have a Habistat pulse proportional thermostat, my heater isn’t working properly, the bulb is red hot however no heat is travelling round the viv like normal. I haven’t moved the censor. Sensor wire length – Depending on where you want to house your thermostat, you need to choose one that has a long enough wire (one connected to the probe). We have been trusting and using Habistat thermostats for our own reptiles for decades and cannot recommend them highly enough. Digital Thermostats The Dimming Thermostat is one of the most accurate methods of temperature control and whilst it is perfect for controlling light bulbs, it can be used on almost any heaters. Setting your reptile heat controller should be a simple task if you correctly follow the given instruction by the manufacturer’s manual. Some have videos, or you can get videos on YouTube or elsewhere detailing how to install them.Features – Some pets such as the Uromastyx, bearded dragons, and other desert lizards require a temperature gradient as well as day and night settings. Choose one that has day and night settings. Additional features such as multiple control, overload circuit, calendar, timers, and so on may make control easier. You require a cooling device to be able to lower temperature. Otherwise, it will work as an on/off and will have to wait until temperate fall to minimum setpoints. Hello I’m wondering if you might be able to help me.. I’ve been having issues with my vivarium at the moment. Fortunately, I looked a bit harder. Wait – there’s a fuse in the thermostat itself. Perhaps this had blown?

Place the probe at an appropriate location, depending on the type of reptile thermostat you chose. The ON/OFF works well with the sensor on the surface for effective control with the others can be either at a central location or other areas depending on how many heaters you are using. However, it shouldn’t touch your pet, and it should be on a direct line of sight with the heat source to avoid wrong readings. This happened a month ago, I got a new bulb and everything was fine however now it’s happened again, I bought a new bulb but no hope, again it gets hot but no heat travelling. I rang the company (prorep) and they told me it was the actual holder for the bulb that was broken so I went and bought a new one but again no hope. Dual heating zones, allowing you to control two heating devices at the same time, each with different settings. You no longer need two thermostats.In the early stages of approaching the set temperature the ‘on’ pulses will be long and the ‘off’ time will be short. I have turned the heat up on the thermostat to test if it would project, I turned it up by quite a few degrees yet still feels cold/the same temp as before. Habistat Digital Dimming Thermostat Day/Night Timer, 600 Watt is suitable for most heaters and will provide a continual temperature rather than a hot/cold cycle. Range of 0 – 50⁰C (32 – 122⁰F). The degree of pulse (i.e. the amount of time the heater is on and the amount of time it is off) is dependent on the enclosure temperature. It cannot work with heat bulbs that produce light as they will be pulsating. Therefore, buy it if you intend to use it with non-light emitting heaters such as heat pads, mats, cables, or ceramic heat emitters, among others.