Innokin Sceptre Coils - 5 Pack [1.2ohm MTL]

Product Information

The Innokin Sceptre pod has a built-in dial that allows you to adjust the pod’s airflow. If you’re using the 1.2-ohm coil, you should turn the dial to the left. If you’re using the 0.5-ohm coil, turn the dial to the right to increase the airflow. Really good battery, have always been a fan of Innokin and can honestly say this is hands down the best pod they’ve done. Flavour is there, throat hit and very good MTL. Over time as you use your coil, you will notice a gradual change in the flavor of the vape juice. It may start to have a burnt flavor or dry hits. When the flavor is no longer desirable, it may be time to change your coils.

Innokin Sceptre Pod | Single Pack | 2 Coils Incl. - Vape Club Innokin Sceptre Pod | Single Pack | 2 Coils Incl. - Vape Club

We recommend pairing the 0.2 Ohm coil with e-liquids that have been blended with 60% VG and higher. Alternatively for the 0.65 Ohm and 0.6 Ohm coil, we recommend using liquids designed for MTL inhale that feature a 50/50 concentration, for a vape that closely resembles the feeling of a cigarette. The primary difference between the two is that the Innokin Endura M18 has a smaller atomizer coil and is designed primarily for mouth-to-lung vaping. While it does have adjustable airflow, it has only two available settings. You can toggle between the settings by reversing the installation of the pod. The Innokin Sceptre, meanwhile, has a dial that allows for more precise airflow adjustments. The Sceptre also has a mesh coil available for greater vapour production, while the Endura M18 doesn’t have that option. How to Use the Innokin Sceptre The Innokin Sceptre 2 pod kit is an ideal choice for new and experienced vapers who prefer a discreet device that creates a small amount of vapour. This small and dependable vape is powered by a 1400mAh battery that will deliver up to 20W of power. There is a Sceptre 2 refillable pod included with each kit and is pre-installed with a 0.6 Ohm S Coil, which allows for an RDTL (Restricted Direct To Lung) vape. The 0.5 Ohm Sceptre coils feature a mesh coil build, the mesh increases both flavour and vapour production, making them ideal for restricted direct to lung vaping. The 1.2 Ohm Sceptre coils produce a more discreet level of vapour, allowing for an inhale that's similar to how you would smoke a cigarette. As you use the Innokin Sceptre, you’re going to find that the flavour changes over time. Usually, you’ll find that you can use an atomizer coil for several days before it requires replacement – and when you’re no longer happy with the flavour you get when vaping, it’s time for a new coil.Please Note: The 0.25 Ohm Innokin Sceptre S coils are only compatible with the Innokin Sensis Pod Kit and Sensis Replacement Pods. The Sceptre 2 vape kit includes a refillable 2ml pod, that has precisely adjustable airflow, giving you better control of how loose or tight your inhale will be. The Sceptre 2 replacement pod also uses Sceptre S coils with a push fit design, making them easy to change. When one coil is finished you can slide a fresh one into place. We recommend pairing these pods with 60% VG e-liquids, 50/50 e-liquids and high PG liquids. These Sceptre Coils are the replacement coils for the Sceptre Pod Kit by Innokin. With your choice between a 0.5ohm Restricted Direct Lung variety and a 1.2ohm Mouth to Lung variety, you'll never have to compromise your vaping preferences when you use the Innokin Sceptre Pod Kit.

Innokin Sceptre S Replacement Coil | Pack of Five - Vape Club

The 5-ohm mesh RDL coil works at 18 or 20 watts and is designed to deliver a restricted direct-to-lung hit with lower-nicotine e-liquids. If you’ve looked at Innokin’s full range of pod-based vaping devices, you’ve probably noticed that the Sceptre bears a certain visual similarity to the Innokin Endura M18. The two devices are also similar in price. So, how do the Innokin Sceptre vs. Endura M18 compare? If your Innokin Sceptre is gurgling, the most likely reason is that you’re using too much air pressure when vaping with the device. That’s particularly likely to happen if you’re using the 1.2-ohm mouth-to-lung coil and have the airflow dial turned to the MTL setting. If you puff harder in an attempt to get bigger clouds out of the device, you’ll overwhelm the pod’s capacity to manage airflow and will draw excess e-liquid into the atomizer coil assembly and chimney. The e-liquid caught in the pod’s chimney creates a gurgling sound and may even enter your mouth if you continue puffing too firmly. Always puff gently when using the Innokin Sceptre. If you’re not happy with the device’s vapour production, you can increase the wattage, increase the airflow or switch to the 0.5-ohm coil. Innokin Sceptre LeakingVape Kit Features Adjustable Airflow Inhale Activated High Battery Capacity Temperature Control Variable Wattage If you’re still having trouble getting your Innokin Sceptre to work, the next thing that you should do is try removing and reseating the atomizer coil. The most common reason why an Innokin Sceptre doesn’t vape is because the atomizer coil is only partially screwed in. If you’re still having trouble and are certain that the atomizer coil is firmly seated, you should replace the coil. Innokin Sceptre Gurgling

Innokin Sceptre 2 Vape Kit | UK Next Day Delivery - Vape Club Innokin Sceptre 2 Vape Kit | UK Next Day Delivery - Vape Club

The 2-ohm MTL coil works at 9 or 10 watts and is designed for mouth-to-lung inhaling with higher-nicotine e-liquids.Please Note: These pods are not compatible with the Innokin Sceptre 2 kit, they can only be used with the Innokin Sceptre kit.